Neptune Vegetable Oil Emulsifier 191NV
       
   

This powerful hydro-carbon free emulsifier for jute fibres produces stable and inexpensive emulsions to assist in jute processing. Neptune has created an emulsifier which, when used with the spinner's own vegetable oil, gives an emulsion with the following benefits.

  • Will comply with IOCCC requirements
  • Entirely free of mineral oil
  • Permissible in food contact applications (FDA 176)
  • Excellent stability
  • Good wetting properties allowing rapid penetration of the fibre
  • Non toxic. There are no harmful ingredients
  • Economic in use
  • Superior spinning performance
  • Hard or soft water can be used
  • Automatic or paddle mixers can be used

 

PREPARATION OF EMULSIONS

Typical standard emulsion (1000 litres)

Pre-mix 2.5 litres Neptune Emulsifier 191NV with 7.5 litres of water to make

10 litres 191NV/water pre-mix

100 litres vegetable oil

890 litres water

 

Apply 30% on long jute to obtain an oil content of 3%

Both the oil / water ratios in the emulsion and the application rate should be varied to establish the best combination for your own oil.

 

MIXING PROCEDURE

1. IT IS ESSENTIAL that the Neptune Emulsifier 191NV is Pre mixed with water before any oil is introduced. Allow any bubbles to escape before adding the oil.

 

2. Add the oil slowly to the 191NV/water pre-mix ensuring that mixing is continuous.

 

3. When the oil and the 191NV/water pre-mix have become a stiff "mayonnaise" the water may be added.

 

FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN UNSTABLE EMULSIONS